Regardless of the specific type meets the seatback, and are just visible when of lower attachment, never install ISOFIX- you lean into the rear seat to install the child compatible child seats such that two seats restraint.
First, locate the seatbelt reset button, which is usually found near the floor on the driver or passenger side. Once you have found the button, press and hold it for a few seconds. You should hear a clicking noise, indicating that the seatbelt has been reset. You must wear a seat belt to keep passengers safe in a car.
With the Jeep firmly chocked (I used ramps with detents which prevents her from rolling forward or back), put the transmission in neutral. Turn the driveshaft by hand, rotating each bolt into place. #3. To separate the coupling, look on the opposite side (opposite from where you just removed the 4 bolts).
The hinge on the side of the TJ seats are the EXACT SAME as the ones for the WJ seats, but have the release lever on them. All you have to do is remove the hinge from the TJ seats, and swap them over to the WJ seats. Cut a 1" slit for the lever to poke out of in the back of the seat, and WAH-LA! 4-bolts. One 1" cut and That's it.
Manual Front Passenger Seatback Adjustment — Recline. To recline, lean forward slightly and lift the lever located on the outboard side of the seat. Then, push the seat rearward to the desired position and release the lever. To return the seatback to its normal position, lean forward and lift the lever.
The connection point to your 2017 Grand Cherokee is then same regardless of what car seat is chosen. Note that most rear facing car seats do not utilize the center anchor point to connect the car seat but rely on the two lower anchor points exclusively. The center anchor point is typically only used for forward facing car seats.
. 233 122 388 104 379 192 42 136 283
how to remove back seat jeep grand cherokee
